Masonry repair
Sweep & inspection
Caps & crowns
Flue relining
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Chimney Company in Long Beach, CA
Chimney Repair Norwalk has served Long Beach since 2017. Most Long Beach chimneys run through homes built between the 1920s and 1950s, and the real problems here come from the Pacific, not the fireplace. Salt-laden marine air works on masonry crowns, dampers, and clay flue tiles year-round, even when the fireplace hasn’t been lit in years. We inspect and repair what the coastal climate does to a chimney, then tell you plainly what needs work and what can wait. Call (855) 942-0212 for a free estimate.
Why Long Beach Homes Are Different
Long Beach is a coastal city where most chimneys serve decorative or occasional-use fireplaces rather than primary heat. The mild marine climate means little sustained heating demand, so creosote buildup is typically light and fireplaces see intermittent use. What actually drives repair calls here is moisture. Year-round coastal humidity and onshore salt fog accelerate deterioration of masonry crowns, rust out dampers, and eat away at mortar joints across the older housing stock. Homes near the coast in 90802, 90803, and 90804 show the most salt and moisture damage.
The building stock tells the story. Long Beach is dense with 1920s-1950s Spanish Colonial Revival homes, Craftsman bungalows, and post-war tract houses, many with original clay-tile flues, exterior masonry chimneys, and older fireboxes. These flues were built for wood or were later relined, and they often need crown repair or full relining rather than modern stainless liners. Technicians working the older Spanish Colonial and bungalow blocks near Belmont Shore and the Shoreline area regularly find rusted-out dampers and salt-eaten mortar crowns on chimneys that haven’t seen a fire in years. The inspection is about moisture intrusion and seismic-era masonry, not sweeping.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Main Long Beach Services
Most Long Beach homeowners call us for one of two reasons: a fireplace that hasn’t been checked in years, or a dryer vent that’s never been cleaned. We handle both.
Chimney Sweep in Long Beach
A sweep in Long Beach is less about heavy creosote and more about getting eyes on the entire system before the rainy season. We remove what’s there, then inspect the flue, damper, crown, and firebox for the salt and moisture damage this climate produces. Homes in 90802 and 90803 near the water often show rust on dampers within a few years of installation. Every sweep includes a written condition report with photos, so you see exactly what we saw. Details on Chimney Sweep in Long Beach.
Dryer Vent Cleaning in Long Beach
Lint-clogged dryer vents are a leading cause of residential fires, and most chimney companies don’t touch them. We do. Long Beach homes built in the 1940s and 1950s often have long, narrow vent runs that trap lint fast, and coastal humidity makes the problem worse by causing lint to clump and stick. A clean vent means your dryer runs shorter cycles, your clothes dry faster, and the fire risk drops hard. Full details on Dryer Vent Cleaning in Long Beach.
Chimney Repair in Long Beach
Chimney repair in Long Beach most often means fixing what the salt air has done to exterior masonry and metal components. Homes across 90802 through 90804, particularly the Spanish Colonial Revival and Craftsman bungalow blocks built from the 1920s through the 1950s, show cracked crowns, spalling brick, rusted dampers, and deteriorated clay flue tiles that let water in during the winter rain season. What starts as a hairline crown crack becomes a spalled chimney face and a firebox that leaks water every time it rains. We don’t just sweep and hand you a report; we repair what we find, using professional-grade materials like DuraFlex, HeatShield, and Olympia Chimney products. That’s the whole point of our Chimney Repair work: an inspection that produces real remediation, not a referral slip.
Chimney Cap Installation
Signs you need it
You hear birds or animals in the flue, see debris falling into the firebox, or notice water staining on the chimney interior after rain.
What it costs in Long Beach
Chimney cap installation in Long Beach typically runs $180 – $340 depending on flue size and whether the existing cap base is still sound.
How we do it
We measure the flue opening, select a stainless or copper cap sized to the existing termination, and secure it with mechanical fasteners rather than adhesives that fail in salt air.
Chimney Cap Replacement
Signs you need it
The existing cap is rusted through, the mesh is torn or missing, or the cap has pulled loose from the crown and rattles in the wind.
What it costs in Long Beach
Replacement in Long Beach falls in the same $180 – $340 range, plus a bit more if the old cap was cemented in and the crown needs patching beneath it.
How we do it
We remove the deteriorated cap, inspect the crown and flue termination underneath, then install a replacement rated for coastal exposure so it won’t rust out in two seasons.
Chimney Liner Installation
Signs you need it
Your clay tile flue is cracked or spalling, a camera inspection shows gaps between tile sections, or the chimney was built without a liner at all.
What it costs in Long Beach
Chimney liner installation in Long Beach typically runs $2,500 – $5,500 depending on flue length, diameter, and access from the roof.
How we do it
We run a camera inspection first, document the full flue condition, then size and install a stainless liner system sized to the appliance and properly insulated from top to bottom.
Chimney Flashing Repair
Signs you need it
Water stains on the ceiling near the chimney, damp drywall in the chase, or visible gaps and lifted flashing at the roofline.
What it costs in Long Beach
Chimney flashing repair in Long Beach typically runs $350 – $800 depending on how much of the existing flashing is salvageable and how much needs to be cut out and replaced.
How we do it
We remove the failed flashing, inspect the underlying roof deck, and install new step and counter flashing sealed against water intrusion with proper overlaps and marine-grade sealant.
Chimney Crown Repair
Signs you need it
The concrete crown is cracked, missing chunks, or has eroded to the point that water pools on top of the chimney instead of shedding off.
What it costs in Long Beach
Chimney crown repair in Long Beach typically runs $400 – $1,200 depending on whether we’re filling cracks and resealing or forming and pouring an entirely new crown.
How we do it
We chip out loose material, build a form if the crown is beyond patching, and pour or trowel a replacement crown with a proper drip edge so water moves away from the chimney body.
What Chimney Repair Costs in Long Beach
| Item | Typical range in Long Beach |
|---|---|
| Chimney cap installation | $180 – $340 |
| Chimney cap replacement | $180 – $340 |
| Chimney liner installation | $2,500 – $5,500 |
| Chimney flashing repair | $350 – $800 |
| Chimney crown repair | $400 – $1,200 |
Do I really need a new liner, or can the old one be patched?
Clay tile liners in 1920s-1950s Long Beach chimneys rarely patch well. We’ll show you the camera footage before recommending a liner. If it’s localized, HeatShield resurfacing can sometimes restore the flue instead of a full replacement, at lower cost.
How much does a chimney sweep cost in Long Beach?
A standard chimney sweep in Long Beach runs $149 – $300 depending on flue accessibility and how long it’s been since the last cleaning. If we find repair issues during the sweep, we’ll quote those separately with photos. Call (855) 942-0212 for an exact price.
Brands We Service in Long Beach
We don’t carry hardware-store patch kits. Our Long Beach jobs run on DuraFlex flexible liner systems, HeatShield flue resurfacing compound, and Olympia Chimney Supply components, sourced from professional chimney trade suppliers. Parts arrive fast, usually same-week, so repairs don’t stall waiting on backordered materials. Learn about our brands.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Company in Long Beach, CA
| Service | Typical range in Long Beach |
|---|---|
| Chimney sweep | $149 – $300 |
| Chimney cap installation | $180 – $340 |
| Chimney cap replacement | $180 – $340 |
| Chimney flashing repair | $350 – $800 |
| Chimney crown repair | $400 – $1,200 |
| Chimney liner installation | $2,500 – $5,500 |
| Dryer vent cleaning | $100 – $200 |
In Long Beach, prices push toward the higher end of those ranges when flue access is difficult, the crown has heavy salt damage, or the liner replacement requires roof work on a steep pitch. We quote the full price before any work begins, with a flat-price sweep agreed before booking.
Neighborhoods We Serve in Long Beach
We work across Long Beach, from the coastal blocks of Belmont Shore and Bluff Park to the inland bungalow streets of Zaferia and the post-war tracts of East Long Beach. Response time across the city is typically same-week, with the 90802-90804 coastal ZIPs often getting the earliest slots because that’s where most of our repair work is concentrated.
- Belmont Shore
- Bluff Park
- Craftsman Village
- East Long Beach
- Zaferia
Service Area – Cities Near Long Beach
We also serve the surrounding communities, including Lakewood, CA, Compton, CA, Bellflower, CA, and our home base in Norwalk, CA. The same coastal repair expertise applies throughout the area, whether the home is a 1940s tract house or a 1920s Spanish Colonial Revival.
Serving Long Beach, CA – Our Local Coverage Area
We’re based in the Long Beach area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Chimney Company in Long Beach
Most chimney repairs, including cap replacement, crown repair, and liner installation, don’t require a permit in Long Beach. Major structural rebuilds might. We’ll tell you if your specific job crosses into permit territory before any work begins.
Even with light fireplace use, an annual inspection is the right call here because moisture damage develops whether you burn or not. A sweep plus inspection once a year catches salt-driven crown and damper problems before they become structural.
Water gets in through cracked crowns or failed flashing and slowly destroys the masonry from inside. You won’t see it until the brick face starts spalling or the ceiling near the chimney stains. At that point the repair costs more than routine maintenance ever would. Call (855) 942-0212 to schedule an inspection.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you. The visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Long Beach Customers Say
"Level two inspection before we bought the house. The report was detailed enough to use as a negotiating point and he explained every photo in it."
- Christine Kim"Crown was cracked and taking water. Repaired it rather than quoting a rebuild, which the previous company had pushed hard for."
- Rachel Barrett"Swept it, capped it, and installed a proper damper. The downdraft smell in the summer that we'd lived with for years is gone."
- Diego Reyes